New MachinesUsed MachinesSpecialsContact UsSite Map

PDF Brochure


FOR RANDOM LENGTH PRE-FINISHED OR UNFINISHED ENGINEERED, LAMINATED, AND SOLID WOOD STRIP & PLANK FLOORING

UNIQUE HASKO "SOFT-TOUCH" PROVEN TECHNOLOGY WILL NOT MARK OR MARR DELICATE PRE-FINISHED SURFACES

SPINDLE SPEEDS VARIABLE TO 7,000 R.P.M. FOR SMOOTHER FINISH

BOTH STATIONS CONFIGURED IDENTICALLY WITH: TRIM SAW; TOP TONGUE/BEVEL/SCORE SAW; BOTTOM TONGUE/BEVEL/SCORE SAW; VERTICAL GROOVE/COPE SAW --- ALL TO ENHANCE APPEARANCE OF FINAL PRODUCT

CONFIGURATION AVAILABLE FOR ENGINEERED WOOD INTERLOCKING "CLICK" OR "SNAP" PROFILES

EXCLUSIVE "SURE-SQUARE" PRE-SQUARING DEVICE ENSURES CONSECUTIVE LUG LOADING & SQUARENESS

VARIABLE FEED RATE OF 100-150 LUGS PER MINUTE (OPTIONAL TO 225 LUGS PER MINUTE)

NEW ULTRA-SMOOTH MAT-VEYOR CROSS-TRANSFER SYSTEM WITH HEAVY 6.000" PITCH FEED CHAIN

CONFIGURATIONS AND AUTOMATION AVAILABLE FOR DEFECTING AT EACH END MATCHER STATION

UNRIVALED SQUARENESS & CONSISTENCY --- DAY-IN AND DAY-OUT





Product Advantages:
  • Wide stance heavy-built design maintains set-up for day-to-day reliability


  • Exclusive Hasko highest grade cast ductile iron chain with 6" pitch x 5" wide x 2" thick with 7/8" dia. pins and replaceable Oilite bronze bushings


  • Hasko's dual feed chains are independently square to their respective tongue or groove end matchers. Synchronization is required only for sweep bar alignment


  • Chain rails precision machined and UHMW lined to provide accurate and smooth chain tracking


  • Receives 4-3/4" flooring between lugs (10-3/4" with every other lug removed)


  • Large 21" diameter chain sprockets deliver positive feed & promotes long chain life via replaceable/reversible bronze wear teeth


  • Pressurized automatic oiling system for feed chains and beds


  • Cutter motors on machined double-dovetail slides, w/numerical scales to simplify changes and facilitate set-up (digital readouts optional)


  • Tonguer motors can move as a UNIT or individually on machined dovetail slides to permit quick and easy precision adjustments


  • Exclusive Mat-Veyor cross transport system smoothly transfers random length flooring between end matcher stations


  • Touch screen operator controls mounted on pivot arm assembly for convenient access


  • Inverter controls provide variable spindle speeds to 7,000 RPM & feed ranges from 100-150 lugs per minute (optionally to 225 lugs per minute)


  • Multiple safety shut-down systems and electronic spindle braking


  • Fully backed by Hasko's service & complete dedication to the flooring industry


  • Designed, built, & parts stocked in Tennessee for immediate and long-term support




    • CAPACITIES:

    Maximum Size:
    Width:     Same as lug spacing
    Thickness: Up to 2"
    Length: 60" and 96" std. (longer, opt.)

    Minimum Size:
    Width:     Down to 1.5"
    Thickness: Thin as 3/8"
    Length: Short as 9.5"

    Feed Rates:
    Standard:     Variable 100-150 lugs/minute
    Optional: Up to 225 lugs/min

    Lug Spacing:
    Between Every Lug:     4.75"
    Every Other Lug: 10.75"


    MOTORS & ELECTRICALS:

    Trim, Tongue, Groove Motors:
    All Spindles:     5 H.P., variable to 7,000 R.P.M.
    Motor Type: Perske high speed
    Configuration: Each station identical with trim, top & bottom tongue/bevel/score, vertical groove
    Spindle Type: Smooth, for Hydro-Lok tooling
    Spindle Controls: Electronic inverters

    Feed System Motors:
    Drive for Chain:     15-25 H.P. electric
    Motor Type: Shaft mount gear reducer
    Drive for Crossover Rolls: 2 H.P. (3 ea)

    Electrical System:
    Panel:     NEMA standards, pre-mounted
    Controls: Solid state PLC, with multiple safety shut-down systems
    Operator Stations: Touch screen
    Voltage: Standard is 440/60/3


    COMPONENT DETAILS

    Hasko Chain:
    Size:     6" pitch x 5" w. x 2" thick Highest grade cast ductile iron w/ 7/8" dia. pins & Oilite bushings

    System Length:
    Std. Open (with operator defecting):     31' & 34' shaft-to-shaft
    Std. Closed (without operator defecting): 25' shaft-to-shaft
    Longer Systems: Optional

    Crossover System:
    Transfers:     24", 36", 36"sections
    Type: Mat-Veyor and steel rolls
    Speed: Proportional to feed speed

    Envelope:
    Std. Systems:     Abt 15'W x 27'-33' L
    Longer Systems: Inquire
    Weight: Appx. 35,000 lbs. (Std.)

    OPTIONAL EQUIPMENT
    System lengths of your choice
    Feed rates of your choice
    Defecting stations
    Laser lights for in-line defecting
    Beveling or scoring attachments
    Jump scoring attachment
    Digital readouts for motor slides
    Tooling for end matcher units
    Voltage other than standard
    Extended hold-down belts
    Infeed and outfeed conveyors
    Grading and nesting stations