New MachinesUsed MachinesSpecialsContact UsSite Map

PDF Brochure


THE WORLD'S STRONGEST LINK TO END MATCHER PROFITABILITY

35,000 POUNDS OF RIGID STEEL ENSURES DAY-TO-DAY CONSISTENT SQUARENESS

EXCLUSIVE NEW HASKO CAST END MATCHER CHAIN IS 6 TIMES HEAVIER THAN TYPICAL CHAIN FROM OTHER MFR'S

MINIMUM OF FLOOR SPACE REQUIRED FOR VARIABLE FEED RATES OF 80-225 LUGS PER MINUTE (STANDARD)

UTILIZES TOUCH SCREEN OPERATOR CONTROLS AND ELECTRONIC SPINDLE BRAKING

5,000 R.P.M. HIGH SPEED SPINDLES FOR SMOOTH FINISH

AUTOMATION AVAILABLE AS CLOSED SYSTEM OR OPEN WITH OPERATOR DEFECTING





Product Advantages:
  • Wide stance heavy-built design maintains set-up for day-to-day reliability


  • Exclusive Hasko highest grade cast ductile iron chain with 6" pitch x 5" wide x 2" thick with 7/8" dia. pins and replaceable Oilite bronze bushings


  • Hasko's dual feed chains are independently square to their respective tongue or groove end matchers. Synchronization is required only for sweep bar alignment


  • Rigid cast iron hold-down assembly with 2-ton Joyce jack and die spring hold-ups ensure end matching accuracy and squareness


  • Chain rails precision machined and UHMW lined to provide accurate and smooth chain tracking


  • Receives 4-3/4" flooring between lugs (10-3/4" with every other lug removed)


  • Large 21" diameter chain sprockets deliver positive feed & promotes long chain life via replaceable/reversible bronze wear teeth


  • Pressurized automatic oiling system for feed chains and beds


  • Cutter motors on machined double-dovetail slides, w/numerical scales to simplify changes and facilitate set-up


  • Tonguer motors can move as a UNIT or individually on machined dovetail slides to permit quick and easy precision adjustments


  • Exclusive Mat-Veyor cross transport system smoothly transfers random length flooring between end matcher stations


  • Touch screen operator controls mounted on pivot arm assembly for convenient access


  • Inverter controls provide variable spindle speeds to 5,000 RPM & feed ranges from 80 to 225 lugs per minute (optionally in excess of 225 lugs per minute)


  • Multiple safety shut-down systems and electronic spindle braking


  • Fully backed by Hasko's service & complete dedication to the flooring industry


  • Designed, built, & parts stocked in Tennessee for immediate and long-term support




    • CAPACITIES:

    Maximum Size:
    Width:     Same as lug spacing
    Thickness: Up to 2"
    Length: Up to 8' (longer, opt.)

    Minimum Size:
    Width:     Down to 1.5"
    Thickness: Thin as 1/2" (5/16" opt.)
    Length: Short as 7.5"

    Feed Rates:
    Standard:     Variable 80-225 lugs/min
    Optional: In excess of 225 lugs/min

    Lug Spacing:
    Between Every Lug:     4.75"
    Every Other Lug: 10.75"


    MOTORS & ELECTRICALS:

    Trim, Tongue, Groove Motors:
    All Spindles:     5 H.P., variable to 5,000 r.p.m.
    Tongue Unit: (1) trim, (1) upper, (1) lower
    Groove Unit: (1) trim, (1) groove motor
    Motor Type: Standard arbor motors
    Spindle Controls: Electronic inverters

    Feed System Motors:
    Drive for Chain:     15-25 H.P. electric
    Motor Type: Shaft mount gear reducer
    Drives for Transfer System: 2 H.P. (3 ea)

    Electrical System:
    Panel:     NEMA standards, premounted
    Controls: Solid state PLC, with multiple safety shut-down systems
    Operator Stations:Touch screen, mounted on pivot arm assembly
    Voltage: Standard is 440/60/3


    COMPONENT DETAILS

    New Hasko Chain:
    Size:     New Hasko highest grade cast ductile iron 6" pitch x 5" wide x 2" thick w/7/8" pins and replaceable Oillite bronze bushings with drilled ports for efficient lubricant penetration. (Each chain link weighs 12-1/2 pounds)

    System Length:
    Standard:     25 to 60 feet
    Longer Systems: Optional

    Crossover System:
    Transfers:    24", 36", 48", and 60" sections
    Type: Mat-Veyor and steel rolls
    Transfer Speed: Proportional to feed speed

    Envelope:
    Short System:     Abt 12' wide x 25' long
    Long System: Abt 12' wide x 60' long
    Weight: 35,000 lbs. (short system)


    OPTIONAL EQUIPMENT

    System lengths of your choice
    Widths to 12 feet, for premium long flooring
    Feed ranges of your choice
    Defecting stations
    Sequence of tonguer & groover
    Tooling for end matcher units
    Voltage other than standard
    Laser lights for in-line defecting
    Infeed and outfeed conveyors
    Grading and nesting stations
    Outfeed transfers

    Many Floor Plans and Options Available
    Also Complete Material Handling Design & Fabrication

    HASKO---Squareness & Reliability for Strip and Plank Flooring!