New MachinesUsed MachinesSpecialsContact UsSite Map

PDF Brochure




The HASKO FSP Presurfacer is designed to offer an innovative and cost-effective solution to the problem of surfacing low-to-middle grade hardwood strips.

It is Ideal for Strip Flooring, Truck Flooring, Lineal Mouldings, Frame Stock, Dimension Stock, Stacking Sticks...and More!

CAN MOUNT IN TANDEM WITH PRIMARY MACHINE

EXCLUSIVE HASKO QUICK CLEARTM TOP HEAD

COMPACT DESIGN, MINIMAL FOOTPRINT

INFINITELY VARIABLE HYDRAULIC FEED RATE

PNEUMATIC UPPER FEED ROLL LIFT

INSERT, INDEXABLE CARBIDE TOOLING

INVERTER BRAKES & GUARD INTERLOCKS


Product Advantages:
  • No additional operator required if mounted in-line

  • Permits jam clearing in one minute or less

  • Will fit into limited space or existing line

  • Easily adjusts to speed of primary machine

  • Capable of taking very heavy cuts

  • Extends tool life on primary machine

  • Greatly enhances finish and tolerance

  • Shares common parts with Hasko FSM MatchMasterTM

  • Built-in jointers to restore knife edges




    CAPACITY:
    MAX. ROUGH SIZE: 6.375" x 3.75" (7.375" optional)
    MAX. FINISHED FACE WIDTH: 6" x 3.00 (7.00" optional)
    MIN. FINISHED FACE WIDTH: 2.25" wide x .500" thick (1.50" wide optional)
    SPEED: variable 250-400 FPM standard (to 575 optional)
    SHORTEST: 10" butted
    MAX. DEPTH OF CUT: .75" top head, .25" bottom head

    HORSEPOWERS:
    TOP HEAD: 50 HP coupled (60, 75 HP optional)
    BOTTOM: 30 HP coupled (50, 40 HP optional)
    FEED: 60 HP hydraulic
    VOLTAGE: 460/60/3 standard (others, optional)
    PANEL: NEMA standards, premounted
    CONTROLS: PLC, magnetic relays, digital touch screen

    FEED WORKS:
    NUMBER OF DRIVE ROLLS: four (two top, two bottom)
    ROLL DIAMETER: 10"
    ROLL DRIVE: direct coupled hydraulic motors
    ROLL TYPE: knurled and hard chromed

    CUTTERHEADS:
    CUTTING CIRCLE: approx. 9.25"
    TOP SPINDLE: "stub" tapered (smooth, optional)
    BOTTOM CYLINDER: 12 knife std. (14-16 knife, opt.)
    SPINDLE SPEED: 3450 RPM standard
    JOINTERS: built-in

    DIMENSIONS:
    BED HEIGHT: 34.50"
    LENGTH: 68.50"
    OVERALL WIDTH: 79.00"


    Updated Guarding And Safety Circuitry System:


    The Hasko FSM and FSP now incorporate a "state of the art" Guarding and Safety Circuitry System designed to provide a very high level of safety for your operators without sacrificing production.

    The FSM control package incorporates circuitry for the five cutterheads utilizing two safety rated relays per cutter head unit wired in compliance with ANSI B11.19 and OSHA 1910.147 regarding Risk Category 3 and "Alternative measures" where safe jam clearing is required.

    The use of dual channel safety relays and expansion modules coordinated with zero speed sensors for all cutter heads in conjunction with solenoid activated access door locking switches, prevent operator access to dangerous areas while the machine is running and during orderly shutdown.

    These upgrades include:
  • Addition or alteration of many point-of-contact guards
  • A zero motion detector which prevents the front access panels from being opened until all rotating parts of the machine are completely stopped
  • Installation of a small jib crane to facilitate the safe handling of cutter heads
  • Hinged guard covering front access to the center match roll and side head cutter exposures
  • 10" extension for the rear or right side head vertical adjustment
  • Barrier guards have been added at two points at the rear of the machine. Each guard is permanently mounted to the floor and the machine is equipped with hinged access doors.

    All of the foregoing parts are field-installable for all existing FSM and FSP models. Contact us at 423-648-5200 for further information.



    HASKO QUICK CLEARTM HEAD
    AN EXCLUSIVE DESIGN - ONLY AT HASKO

    Top cutterhead assembly is hydraulically raised & lowered to a pre-set position. Clears jam in seconds ---not minutes! No expensive screws, worms, or nuts to wear out and lose accuracy. Hydraulic locks hold cutterhead assembly inflexible.